Day 8

Lab:
const int BUTTON = 2; //The Button is connected to pin 2
boolean lastButton = LOW;//Last Button State
boolean currentButton = LOW;//Current Button State
int count = 0;
boolean debounce(boolean last, int button)
{
  boolean current = digitalRead(button); //Read the button state
  if (last != current) //if it's different...
  {
    delay(10); //wait 5ms
    current = digitalRead(button); //read it again
  }
  return current; //return the current value
}
const int RLED = 10; //Red LED on Pin 11
const int GLED = 11; //Green LED on Pin 10
const int BLED = 9; //Blue LED on Pin 9
const int LIGHT = 0;//light sensonr
const int MIN_LIGHT = 70;//minimum value for sensor
const int MAX_LIGHT = 600;//mmax val for sensor
int val = 0;
//notes for song
#define NOTE_B0  31
#define NOTE_C1  33
#define NOTE_CS1 35
#define NOTE_D1  37
#define NOTE_DS1 39
#define NOTE_E1  41
#define NOTE_F1  44
#define NOTE_FS1 46
#define NOTE_G1  49
#define NOTE_GS1 52
#define NOTE_A1  55
#define NOTE_AS1 58
#define NOTE_B1  62
#define NOTE_C2  65
#define NOTE_CS2 69
#define NOTE_D2  73
#define NOTE_DS2 78
#define NOTE_E2  82
#define NOTE_F2  87
#define NOTE_FS2 93
#define NOTE_G2  98
#define NOTE_GS2 104
#define NOTE_A2  110
#define NOTE_AS2 117
#define NOTE_B2  123
#define NOTE_C3  131
#define NOTE_CS3 139
#define NOTE_D3  147
#define NOTE_DS3 156
#define NOTE_E3  165
#define NOTE_F3  175
#define NOTE_FS3 185
#define NOTE_G3  196
#define NOTE_GS3 208
#define NOTE_A3  220
#define NOTE_AS3 233
#define NOTE_B3  247
#define NOTE_C4  262
#define NOTE_CS4 277
#define NOTE_D4  294
#define NOTE_DS4 311
#define NOTE_E4  330
#define NOTE_F4  349
#define NOTE_FS4 370
#define NOTE_G4  392
#define NOTE_GS4 415
#define NOTE_A4  440
#define NOTE_AS4 466
#define NOTE_B4  494
#define NOTE_C5  523
#define NOTE_CS5 554
#define NOTE_D5  587
#define NOTE_DS5 622
#define NOTE_E5  659
#define NOTE_F5  698
#define NOTE_FS5 740
#define NOTE_G5  784
#define NOTE_GS5 831
#define NOTE_A5  880
#define NOTE_AS5 932
#define NOTE_B5  988
#define NOTE_C6  1047
#define NOTE_CS6 1109
#define NOTE_D6  1175
#define NOTE_DS6 1245
#define NOTE_E6  1319
#define NOTE_F6  1397
#define NOTE_FS6 1480
#define NOTE_G6  1568
#define NOTE_GS6 1661
#define NOTE_A6  1760
#define NOTE_AS6 1865
#define NOTE_B6  1976
#define NOTE_C7  2093
#define NOTE_CS7 2217
#define NOTE_D7  2349
#define NOTE_DS7 2489
#define NOTE_E7  2637
#define NOTE_F7  2794
#define NOTE_FS7 2960
#define NOTE_G7  3136
#define NOTE_GS7 3322
#define NOTE_A7  3520
#define NOTE_AS7 3729
#define NOTE_B7  3951
#define NOTE_C8  4186
#define NOTE_CS8 4435
#define NOTE_D8  4699
#define NOTE_DS8 4978

#define melodyPin 3 //pin for speaker
//Mario main theme melody
int melody[] =

{
  NOTE_E7, NOTE_E7, 0, NOTE_E7,
  0, NOTE_C7, NOTE_E7, 0,
  NOTE_G7, 0, 0,  0,
  NOTE_G6, 0, 0, 0,

  NOTE_C7, 0, 0, NOTE_G6,
  0, 0, NOTE_E6, 0,
  0, NOTE_A6, 0, NOTE_B6,
  0, NOTE_AS6, NOTE_A6, 0,

  NOTE_G6, NOTE_E7, NOTE_G7,
  NOTE_A7, 0, NOTE_F7, NOTE_G7,
  0, NOTE_E7, 0, NOTE_C7,
  NOTE_D7, NOTE_B6, 0, 0,

  NOTE_C7, 0, 0, NOTE_G6,
  0, 0, NOTE_E6, 0,
  0, NOTE_A6, 0, NOTE_B6,
  0, NOTE_AS6, NOTE_A6, 0,

  NOTE_G6, NOTE_E7, NOTE_G7,
  NOTE_A7, 0, NOTE_F7, NOTE_G7,
  0, NOTE_E7, 0, NOTE_C7,
  NOTE_D7, NOTE_B6, 0, 0
};
//Mario main them tempo
int tempo[] =
{
  12, 12, 12, 12,
  12, 12, 12, 12,
  12, 12, 12, 12,
  12, 12, 12, 12,

  12, 12, 12, 12,
  12, 12, 12, 12,
  12, 12, 12, 12,
  12, 12, 12, 12,

  9, 9, 9,
  12, 12, 12, 12,
  12, 12, 12, 12,
  12, 12, 12, 12,

  12, 12, 12, 12,
  12, 12, 12, 12,
  12, 12, 12, 12,
  12, 12, 12, 12,

  9, 9, 9,
  12, 12, 12, 12,
  12, 12, 12, 12,
  12, 12, 12, 12,
};
//Underworld melody
int underworld_melody[] = {
  NOTE_C4, NOTE_C5, NOTE_A3, NOTE_A4,
  NOTE_AS3, NOTE_AS4, 0,
  0,
  NOTE_C4, NOTE_C5, NOTE_A3, NOTE_A4,
  NOTE_AS3, NOTE_AS4, 0,
  0,
  NOTE_F3, NOTE_F4, NOTE_D3, NOTE_D4,
  NOTE_DS3, NOTE_DS4, 0,
  0,
  NOTE_F3, NOTE_F4, NOTE_D3, NOTE_D4,
  NOTE_DS3, NOTE_DS4, 0,
  0, NOTE_DS4, NOTE_CS4, NOTE_D4,
  NOTE_CS4, NOTE_DS4,
  NOTE_DS4, NOTE_GS3,
  NOTE_G3, NOTE_CS4,
  NOTE_C4, NOTE_FS4, NOTE_F4, NOTE_E3, NOTE_AS4, NOTE_A4,
  NOTE_GS4, NOTE_DS4, NOTE_B3,
  NOTE_AS3, NOTE_A3, NOTE_GS3,
  0, 0, 0
};
//Underwolrd tempo
int underworld_tempo[] = {
  12, 12, 12, 12,
  12, 12, 6,
  3,
  12, 12, 12, 12,
  12, 12, 6,
  3,
  12, 12, 12, 12,
  12, 12, 6,
  3,
  12, 12, 12, 12,
  12, 12, 6,
  6, 18, 18, 18,
  6, 6,
  6, 6,
  6, 6,
  18, 18, 18, 18, 18, 18,
  10, 10, 10,
  10, 10, 10,
  3, 3, 3
};
void setup()
{
  pinMode(RLED, OUTPUT);
  pinMode(GLED, OUTPUT);
  pinMode(BLED, OUTPUT);//LED
  pinMode(3, OUTPUT);//buzzer
  pinMode (BUTTON, INPUT);
  Serial.begin(9600);
}




int song = 0;

void sing(int s,int count) {
  // iterate over the notes of the melody:
  song = s;
  if (song == 2) {
    Serial.println(" 'Underworld Theme'");
    int size = sizeof(underworld_melody) / sizeof(int);
    for (int thisNote = 0; thisNote < size; thisNote++) {

      // to calculate the note duration, take one second
      // divided by the note type.
      //e.g. quarter note = 1000 / 4, eighth note = 1000/8, etc.
      int noteDuration = 1000 / underworld_tempo[thisNote];

      buzz(melodyPin, underworld_melody[thisNote], noteDuration,count);

      // to distinguish the notes, set a minimum time between them.
      // the note's duration + 30% seems to work well:
      int pauseBetweenNotes = noteDuration * 1.30;
      delay(pauseBetweenNotes);

      // stop the tone playing:
      buzz(melodyPin, 0, noteDuration,count);

    }

  } else {

    Serial.println(" 'Mario Theme'");
    int size = sizeof(melody) / sizeof(int);
    for (int thisNote = 0; thisNote < size; thisNote++) {

      // to calculate the note duration, take one second
      // divided by the note type.
      //e.g. quarter note = 1000 / 4, eighth note = 1000/8, etc.
      int noteDuration = 1000 / tempo[thisNote];

      buzz(melodyPin, melody[thisNote], noteDuration,count);

      // to distinguish the notes, set a minimum time between them.
      // the note's duration + 30% seems to work well:
      int pauseBetweenNotes = noteDuration * 1.30;
      delay(pauseBetweenNotes);

      // stop the tone playing:
      buzz(melodyPin, 0, noteDuration,count);

    }
  }
}

void buzz(int targetPin, long frequency, long length,int count) {
  ledcolor(count,255);
  long delayValue = 1000000 / frequency / 2; // calculate the delay value between transitions
  //// 1 second's worth of microseconds, divided by the frequency, then split in half since
  //// there are two phases to each cycle
  long numCycles = frequency * length / 1000; // calculate the number of cycles for proper timing
  //// multiply frequency, which is really cycles per second, by the number of seconds to
  //// get the total number of cycles to produce
  for (long i = 0; i < numCycles; i++) { // for the calculated length of time...
    digitalWrite(targetPin, HIGH); // write the buzzer pin high to push out the diaphram
    delayMicroseconds(delayValue); // wait for the calculated delay value
    digitalWrite(targetPin, LOW); // write the buzzer pin low to pull back the diaphram
    delayMicroseconds(delayValue); // wait again or the calculated delay value
  }
  ledcolor(count,0);

}


void ledcolor(int count,int value)
{
    if (count == 0)
  {
    analogWrite(RLED, 0);
    analogWrite(GLED, 0);
    analogWrite(BLED, value);
  }
  else if (count == 1)
  {
    analogWrite(RLED, value);
    analogWrite(GLED, 0);
    analogWrite(BLED, 0);
  }
  else if (count == 2)
  {
    analogWrite(RLED, 0);
    analogWrite(GLED, value);
    analogWrite(BLED, 0);
  }
  else if(count==3)
  {
    analogWrite(RLED, value);
    analogWrite(GLED, value);
    analogWrite(BLED, value);
  }
}


void loop()
{

  val = analogRead(LIGHT);
  val = map(val, MIN_LIGHT, MAX_LIGHT, 255, 0);
  val = constrain(val, 0, 255);

  currentButton = debounce(lastButton, BUTTON);//read debounced state
  if (lastButton == LOW && currentButton == HIGH) //if it was pressed...
  {
    count++;
  }
  lastButton = currentButton; //reset button value
  if (count >= 4)count = 0; //reset led color
  //analogWrite(count, val);
ledcolor(count,val);



  Serial.println(count);
  if (val >= 100)
  {
    sing(1,count);

    if (val < 100)
    {
      //exit(0);
    }


  }


}

Comments

Post a Comment

Popular posts from this blog

Homework 6

Image
1,2 /*––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––-*/ /*  This program determines the distance between two points    */ /*  that are specified with latitude and longitude values      */ //Yunfei Pan #include <stdio.h> #include <math.h> #define PI 3.141593 int main(void) { /*  Declare variables and function prototype.  */ double lat1, long1, lat2, long2; double gc_distance(double lat1,double long1, double lat2,double long2); /*  Get locations of two points.  */ printf("Enter latitude north and longitude west "); printf("for location 1: \n"); scanf("%lf %lf",&lat1,&long1); printf("Enter latitude north and longitude west "); printf("for location 2: \n"); scanf("%lf %lf",&lat2,&long2); /*  Print great circle distance.  */ printf("Great Circle Distance: %.0f miles \n", gc_distance(lat1,long1,lat2,long2)); /*  Exit program.  */ return 0; } /*–––...
Read more

Another Day 23

Image
#include <cmath> #include"date.h" #include <iostream> using namespace std; class date { public: date(); date(int m, int d, int y); void input(); void print1(); void print2(); // Declare private data members. private: int mm, dd, yyyy; char* month; }; date::date() { mm = dd = yyyy = 0; } date::date(int m, int d, int y) { mm = m; dd = d; yyyy = y; } void date::input() { cin >> mm >> dd >> yyyy; } void date::print1() { cout << mm << "/" << dd << "/" << yyyy << endl; } void date::print2() { switch (mm) { case 1: month = "January"; break; case 2: month = "February"; break; case 3: month = "March"; break; case 4: month = "April"; break; case 5: month = "May"; break; case 6: month = "June"; break; case 7: month = "July"; br...
Read more

Homework4

2. a=7500 3. const int BLED = 9; //Blue LED on Pin 9 const int GLED = 10; //Green LED on Pin 10 const int RLED = 11; //Red LED on Pin 11 const int BUTTON1 = 2; //The Button is connected to pin 2 const int BUTTON2 = 3; const int BUTTON3 = 4; const int BUTTON4 = 5; boolean lastButton1 = LOW; boolean lastButton2 = LOW; boolean lastButton3 = LOW; boolean lastButton4 = LOW;//Last Button State boolean currentButton1 = LOW; boolean currentButton2 = LOW; boolean currentButton3 = LOW; boolean currentButton4 = LOW;//Current Button State int ledMode = 0;//Cycle between LED states int bnk = 0; void setup() {   pinMode (BLED, OUTPUT); //Set Blue LED as Output   pinMode (GLED, OUTPUT); //Set Green LED as Output   pinMode (RLED, OUTPUT); //Set Red LED as Output   pinMode (BUTTON1, INPUT);   pinMode (BUTTON2, INPUT);   pinMode (BUTTON3, INPUT);   pinMode (BUTTON4, INPUT); //Set button as input (not required...
Read more